Table of Contents
Advertisement
2.
Press F or H to select the graph. Then, press B(View).
4.
If you want to edit the notes you made about the graph, select the graph,
then press A(
information.
Deleting a Saved Frequency Graph
To delete a saved frequency graph, do the following:
1.
Display the list frequency sweep graphs (see Figure 7-5). Then, press F
or H to select the graph.
2.
Press C(
Erase
The selected graph and associated notes are permanently deleted from the
tester's memory.
Printing Test Results
To print a saved text result, TDR waveform trace, or a frequency sweep graph,
do the following:
1.
Connect the CopperPro to a serial graphics printer (see "Connecting to a
Printer" in Chapter 2) using the optional Printer Cable.
2.
Select the proper printer type in User Options "RS232 Port Setup" (default
is Seiko DPU-414).
3.
To print a displayed TDR waveform or graph:
•
Press > then N ("Print Screen" function)
•
Press A (Printer)
•
The screen graphic image will be printed
4.
To print text-based test results:
•
Select the desired results (view by wire center, time stamp, or all)
•
Press > then N ("Print Screen" function)
•
Press A (Print Screen) to print only the results displayed on the
screen, then A (Printer) or
•
Press B (Print Results) to print the range of selected results.
). In the space provided type the desired
Edit Remarks
).
Saved Test Results
Printing Test Results
7
7-11
Advertisement
Table of Contents
