Table of Contents
Advertisement
Firmware Revision Shows the revision of the firmware.
Line Frequency
Module Status
GUI Reference
Common GUI Components
Common GUI Components
This section describes the following GUI components commonly used in the
Keysight Easy Test Navigator software.
•
"Module Configuration Dialog Box" on page 4-78
Module Configuration Dialog Box
You can do the following operations in the Module Configuration dialog box.
•
Checking the revision of the firmware
•
Setting the power line cycle
•
Checking the status of the hardware modules
•
Resetting the hardware modules
•
Executing the self-test
•
Executing the self-calibration
•
Executing the self-diagnostics
This dialog box is opened by selecting the main menu Configuration > Module....
Select the power line frequency from below. This is used as the PLC value for the
measurement time setting.
•
50 Hz
•
60 Hz
Shows the module's model numbers and the result of the self-test, self-calibration,
and self-diagnostics for the modules as the status.
The following tables shows the configuration and status.
4- 78
Keysight B1507A User's Guide, Ed ition 1
Advertisement
Table of Contents
