Summary Of Files - Keysight Technologies B1507A User Manual

Table 4-2
File Type
Setup File Setup data
You can save this if needed.
Measurement Setup data and measurement data
Data File including the device ID and comment
This is automatically saved after the
measurement.
You can optionally save this.
Calibration Data Calibration data
File
This is automatically saved after the
calibration execution.
Factory Default Calibration data
This is used when there is no user
calibration data.

Summary of Files

The following shows the summary of the files handled by the capacitance
measurement software.
Summary of Files
Description
File name of Measurement Data File on Auto-saving
An auto-saved measurement data file is named as the following rule.
1. Concatenates the device ID, date and time on save by an underscore (_).
2. Concatenates the file extension (.pda-cap.txt) to the end of the "step 1" string.
3. If the "step 2" file name duplicates the existing file name, concatenates the serial
number from 2 enclosed by brackets and the file extension to the end of the "step
1" string.
Keysight B1507A User's Guide, Ed ition 1
Capacitance Measurement Software
Extension Folder as Initial Setting
*.pda-cap (You can specify the folder
when saving the data)
*.pda-cap.txt C:\Users\<user name>\
Documents\Keysight\
SeriesB150x\PowerDevice
Analyzer\DeviceCapacitan
ce\DataStore
(You can change this)
*.pda-cap.cal C:\ProgramData\Keysight\
SeriesB150x\PowerDevice
Analyzer\DeviceCapacitan
ce\UserCalibrationData
C:\ProgramData\Keysight\
SeriesB150x\PowerDevice
Analyzer\DeviceCapacitan
ce\CalibrationData
GUI Reference
4- 31