Table of Contents
Advertisement
Specify the hold time of the sweep start voltage. At the sweep start point, the
start voltage is forced for more than the specified time.
Setting range: 0 to 655.35 s
For pulse output measurement:
•
Auto Period
Enable or disable the automatic adjustment for the pulse period. To enable this,
mark the check box.
•
Pulse Period
Specify the pulse period.
Setting range: 5 ms to 5 s
If the Auto Period is enabled, this is automatically adjusted to minimum period
corresponding to the pulse width.
•
Aperture
Specify the measurement time at each pulse.
Setting range: 2 s to 20 ms
•
Hold Time
Specify the hold time of the sweep start voltage. At the sweep start point, the
start voltage is forced for more than the specified time.
Setting range: 0 to 655.35 s
The following parameter can be shown or hidden by clicking the chevron
Details.
•
Aperture
•
Hold Time
Keysight B1507A User's Guide, Ed ition 1
GUI Reference
I/V Measurement Software
of the
4- 41
Advertisement
Table of Contents
