Table of Contents
Advertisement
Figure 4-12
c
d
g
b
a
a. Displaying
Characteristic
Curves
b. Markers
GUI Reference
I/V Measurement Software
Characteristics
Characteristics
f
e
b
This page shows the graph of the specified I/V characteristics as the measurement
result. To display this page, click the Characteristics tab.
The data for the X and Y-axes are assigned according to the I/V characteristics
specified in the Setup.
If the graph has multiple characteristic curves for different measurement conditions,
the measurement conditions are displayed on the graph with the check boxes.
Marking the check box displays the characteristic curve for the measurement
condition. You can mark multiple check boxes for the measurement conditions.
You can change the minimum and maximum values on the X and Y-axes by clicking
the value.
This graph supports two kinds of markers: Domain marker and Trace marker. You
can switch these markers by clicking the Marker button shown in the bottom part of
the graph.
: Marker button when the Domain marker is used.
: Marker button when the Trace marker is used.
The Domain marker can read multiple characteristic values for the X-axis position.
The Domain marker supports two markers (A and B). Marker A is always available.
To use the Marker B, mark the check box for the Marker B. The Marker B is a break
line. To move the marker position, use the rotary knob or mouse.
4- 52
Keysight B1507A User's Guide, Ed ition 1
Advertisement
Table of Contents
