Table of Contents
Advertisement
Step 3. Enter or select the setup conditions for the gate of MOSFET in Gate/Base Voltage
NOTE
How To Perform Measurement
How To Perform I/V Measurement
Pulse Step at the center of Setup area.
•
Selecting Step Mode
From the Step Mode drop-down list, select a step mode of pulse voltage output.
LinearSingle
ListSingle
This example selects the ListSingle.
•
To change step values
Click the value in the List and you can change it to new value.
•
To insert new step value
3- 12
Outputs voltage level changes from the Start value to the
Stop value at equal intervals.
Specify the output voltages of each step in the List.
Each step voltage in the List will be output in order from top
to bottom.
Keysight B1507A User's Guide, Ed ition 1
Advertisement
Table of Contents
