Resource/Output
Mode/Output
Sequence
Table 4-3
GUI Reference
I/V Measurement Software
Depending on the selected characteristics measurement, the pre-defined output
mode and sequence are automatically selected. If necessary, you can change the
measurement resource, the output mode, and the output sequence. Table 4-3 shows
the available alternatives for the gate/base terminal, and Table 4-4 shows the
available alternatives for the drain/collector terminal.
Available Resource/Output Mode/Output Sequence for Gate/Base Terminal
Measurement Resource
•
MPSMU
MPSMU is
connected to this
terminal.
4- 50
Output Mode
•
V
Specifies the DC
voltage output.
•
VPulse
Specifies the pulse
voltage output.
•
I
Specifies the DC
current output.
•
IPulse
Specifies the pulse
current output.
Keysight B1507A User's Guide, Ed ition 1
Output Sequence
•
Constant
Specifies the
constant bias output
sequence.
•
Step
Specifies the step
bias output sequence.
•
Sweep
Specifies the sweep
output sequence.