Select the step value immediately after where you want to insert new step value
and click the Insert button
•
To change an output order of step values
Click the Move Down and the Move Up buttons
order of the selected step value.
•
To delete a step value
Click the Delete button
By clicking the
For more information on setting items, see "Setup" on page 4-38.
Step 4. Enter or select the setup conditions for the drain of MOSFET in Drain/Collector
Voltage Pulse Sweep at the right side of Setup area.
Select or specify a sweep mode, a sweep start value, a sweep stop value, and a
voltage compliance.
•
Sweep Mode
Select a sweep mode from the Sweep Mode drop-down list.
LinearSingle
LogSingle
LinearDouble
Keysight B1507A User's Guide, Ed ition 1
.
to delete the selected step value.
chevron, the area expands to set more detail conditions.
Details
One-way linear sweep from the Start (sweep start value) to
the Stop (sweep stop value).
One-way logarithmic sweep from the Start (sweep start
value) to the Stop (sweep stop value).
Linear-sweep from the Start (sweep start value) to the Stop
(sweep stop value) and then return linear-sweep from the
Stop to the Start.
How To Perform Measurement
How To Perform I/V Measurement
to move down or up an
3- 13