Table of Contents
Advertisement
WARNING
CAUTION
CAUTION
Introduction
Mainframe Rear View
4. GPIB interface
Use an Keysight 82357A USB/GPIB interface or Keysight 10833A/B/C/D
GPIB cable to connect to an external computer or equipment.
5. Video output terminal
VGA connector. For an external display. Signal to the built-in LCD is also
applied to this terminal.
6. Measurement Resources
See A to D described later.
7. Circuit Common (
Normally, connect the terminals together by using the shorting bar. For floating
measurement, remove the shorting bar.
If the Circuit Common terminal is not connected to the frame ground terminal
(for floating measurement), a potential shock hazard may present. Do not
touch any of measurement circuit at any time while a floating measurement is
in progress.
For floating measurement, do not apply dangerous voltage to the Circuit Common
terminal. Failure to heed this caution may result in damage to the instrument.
8. Zero Check terminal
Ground reference point of the instrument.
The Zero Check terminal can be used for the service purpose only. For the normal
operation, leave this terminal open and do not connect anything to this terminal.
Connecting anything can damage the instrument.
9. GNDU terminal
0 V constant voltage source. Used for the reference of measurement ground.
Triaxial connector.
10. LAN interface
RJ45 connector.
11. USB interfaces
USB, 2 ports. For keyboard, mouse, or peripherals.
1- 10
) and frame ground (
Keysight B1507A User's Guide, Ed ition 1
) terminals
Advertisement
Table of Contents
