Table of Contents
Advertisement
Installation
Inspection and Installation
Inspection and Installation
Do the following when this instrument arrived.
•
"To Inspect Shipment"
•
"To Perform Initial Setup"
•
"To Connect Selector and Test Fixture"
•
"To Check Operation of Selector"
Do the following setup if you need.
•
"To Change Windows Logon Setting"
•
"To Change GPIB Address"
•
"To Enable System Controller"
To Inspect Shipment
1. Before unpacking any components, inspect all boxes for any signs of damage
that might have occurred during shipment, such as:
•
dents
•
scratches
•
cuts
•
water marks
If you suspect any damage, contact Keysight Technologies.
2. When you open the boxes that contain the instrument and accessories, check the
components against the contents lists attached to the boxes.
If anything is missing, contact Keysight Technologies.
After the inspection, move the instrument and accessories to the installation site. For
the requirements for the installation site, see "Requirements" on page 2-4.
2- 8
Keysight B1507A User's Guide, Ed ition 1
Advertisement
Table of Contents
