is used in the operation of this equipment.
LETHAL VOLTAGE on CONTACT
may be present at measurement terminals,
if you fail to take in all safety precautions!
•
When the RED indicator lights, lethal voltage (3000 V dc/pulse) may appear at
measurement terminals.
•
Usually use the interlock function.
•
Do not operate the instrument unless another person is around the work space who is
familiar with instrument operation and hazards or administering first aid.
Potentials less than 500 V may cause death under certain conditions. Therefore,
•
adequate preventive measures must be taken at all times!
FIRST AID FOR ELECTRIC SHOCK
SPECIAL ATTENTION
TO RESCUE IN SAFETY
•
Never rush into an accidental situation.
•
Take special attention to the following notices to prevent second accident.
•
Do NOT touch the CASUALTY or conductive surface with your hands unprotected.
•
Shut off high voltage at once.
•
Disconnect AC mains.
•
If it is unsure to make safe, the following procedure will helps to protect your lives
during the CASUALTY is rescued.
•
Stand on a dry insulating material; use a dry wooden or plastic implement to free
the CASUALTY from contact with hazardous electrical source.
•
Ground the circuit to de-energize.
WARNING
High Voltage