Table of Contents
Advertisement
Figure 4-6
a
b
a. Measurement
Circuit
NOTE
b. Details
GUI Reference
Capacitance Measurement Software
Connections
Connections
This page shows the measurement circuit that is automatically connected according
to your specified measurement conditions. To display this page, click the
Connections tab.
On the measurement circuit, the measurement terminals, the measurement
resources, and the built-in capacitance and resistance are displayed. The following
shows the relationship between the terminal numbers and the measurement
terminals.
•
1: Base/Gate terminal
•
2: Collector/Drain terminal
•
3: Emitter/Source terminal
•
4: Guard terminal
If DUT is a diode, connect the cathode terminal to 2. Collector/Drain terminal, and
the anode terminal to 3. Emitter/Source terminal.
In the case that the specified parameter characteristics has multiple measurements
such as Ciss, Coss, and Crss measurements, the measurement circuits are
respectively separated for the measurements by left-side tabs.
This area is hidden as default. You can show this area under the measurement circuit
by clicking the chevron
4- 24
of the Details.
Keysight B1507A User's Guide, Ed ition 1
Advertisement
Table of Contents
