N77Xx Viewer Common User Interface Functions; Connecting To An Instrument - Keysight Technologies N77 Series User Manual

1 Getting Started

N77xx Viewer Common User Interface Functions

Connecting to an Instrument

44
1 Press and hold the Reset/standby button until the instrument starts
to reboot.
2 When the instrument reboots, press the Reset/standby button once
more briefly, to confirm you want to delete all the stored data.
When you first launch the N77xx Viewer, it is not connected to any of
your instruments.
1 Click on the "Connect" icon at the top right of the window.
2 Select the instrument to which you want to connect from the list.
Figure 30 Connecting to an Instrument
Keysight N77xx Series