Reset Trill; Set Ingress-Load-Balancing - HPE FlexFabric 5930 Series Command Reference Manual

Table 16 Command output
Field
Ping TRILL 0xbca3, press CTRL_C to
break
reply from 0xbca3: seq=0 ttl=63
time=0.851 ms
--- Ping TRILL statistics for 0xbca3 ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max =
0.812/0.843/0.872 ms

reset trill

Use reset trill to clear dynamic running statistics of the TRILL process.
Syntax
reset trill
Views
User view
Predefined user roles
network-admin
Examples
# Clear dynamic running statistics of the TRILL process.
<Sysname> reset trill

set ingress-load-balancing

Use set ingress-load-balancing to perform one-time load balancing over TRILL distribution trees.
Syntax
set ingress-load-balancing
Views
TRILL view
Predefined user roles
network-admin
Usage guidelines
If traffic is not evenly distributed over distribution trees, you can perform one-time load balancing
over TRILL distribution trees.
Description
Test whether RB 0xbca3 is reachable. Press Ctrl+C to abort the
ping TRILL operation.
Received echo replies from RB 0xbca3. If no echo reply is
received within the timeout period, this field displays Request
time out.
•
seq—Packet sequence number.
•
ttl—TTL value in the echo reply.
•
time—Response time.
Statistics on data received and sent in the ping TRILL operation.
Number of sent OAM echo requests.
Number of received OAM echo replies.
Percentage of unacknowledged packets to the total sent
packets.
Minimum/average/maximum response time in milliseconds.
31