Display Features - AEMC 5070 User Manual

1.800.561.8187

2.2 DISPLAY FEATURES

Indicates that the instrument is controlled remotely via the USB interface.
REMOTE In this mode, the buttons and rotary switch are inactive, except for the OFF
position.
Flashes when data is transmitted to the serial interface. It is on continuously
COM
if there is a problem in transmission.
2nd Indicates that the secondary function of a key will be used.
Indicates that the "programmed time test" mode was selected before the
measurement began.
Indicates that the "automatic calculation of Dielectric Absorption Ratio" mode
DAR
was selected before the measurement was started.
Indicates that the "automatic calculation of Polarization Index" mode was
PI
selected before the measurement was started.
Indicates that the "automatic calculation of "Dielectric Discharge Index"
DD
mode was selected before the measurement was started.
SMOOTH Smooths the insulation measurement readings on the display for better visibility.
Indicates that the alarm is activated. An audible alarm will sound if the value
ALARM
Indicates the remaining battery charge.
Indicates that the generated voltage is dangerous, V > 120 V
Indicates that external voltage is present - this symbol is activated when the
Start button is pressed if V > 25 V
12
www.
.
Megohmmeter Model 5070
information@itm.com
.com
.