Adding Data; Sending And Concluding A Report - Siemens ARCADIS Varic Operator's Manual

Saving a report
ARCADIS Varic
SPR2-310.620.30.02.02
Because of digit overlaps, the display of long radiation times (> 65 s) can be dif-
ficult to read in the Dose card. However, this does not affect the printable radia-
tion report.

Adding data

Enter a comment and a short description in the MPPS area, if necessary.
Enter all performed actions in the table on the Actions card.
Click the Billing card in the foreground and enter all action steps, the film con-
sumption and the material into the tables.
If you want to annotate the applied radiation dose, click the Dose card in the
foreground and enter the text into the lower Comment field.

Sending and concluding a report

If all data in the performance report are entered correctly, you can close the report
and therefore also the examination. If further working steps are planned, you can
save the report temporarily and conclude it later.
Depending on operational requirements, you can transfer the report to the
HIS/RIS system.
Click the Save button.
– Your entries are saved to the report and the Modality Performed
Procedure Step window is closed.
Patient data
0
0
43
of 60