Additional Software Installation - Zeiss HUMPHREY 720i User Manual

APPENDIX F APPENDIX A

Additional software installation

REV. B 02/03 PN 51680-1 R E V . A 10 9/ 9 8 P N 47653
Occasionally, additional software packages become available for the HFA II which do not
require a full installation procedure to take place. The following instructions describe the steps
to install an optional software feature. Do not use this method for full software
installations. Follow the steps described on the previous page.
1
From the Main Menu,
press the SYSTEM SETUP
icon. On the System Setup
menu, press ADDITIONAL
SETUP. Next, press INSTALL
SOFTWARE.
2
Insert the software disk to
be installed. Press OK
when ready as indicated on the
screen. Follow any additional
directions on the screen.
3
You will see this screen
when successful. Press OK
to finish the procedure. You
do not need to restart the HFA
II when using this method of
software installation.
Note: Occasionally, the write-
protection status of the disk
makes a difference during
installation. If unsuccessful,
change the write protection
and repeat the above steps.
HUMPHREY FIELD ANALYZER II - H U M P H R E Y F I E L D A N A L Y Z E R
HUMPHREY FIELD ANALYZER II
A-19 F-3
i I I
series