2-18
Altering the Main Menu
screen
REV. B 02/03 PN 51680-1
1
Start at the System Setup screen. Select ALTER MAIN MENU.
2
Press ADD/CHANGE
A BUTTON.
3
Select the button position
where the change is to take
place.
4
Choose from any test type, including SCREENING, THRESHOLD, SPECIALTY, CUSTOM, and
KINETIC tests. After selecting, the same Test Library screens normally accessed through
the Main Menu screen will appear.
5
Select the test pattern that you wish to add or change. The Parameter Setup screen will
appear. All test buttons start with standard parameters.
6
Change the existing parameters to fit your needs. Finalize your choices by pressing
SELECTION COMPLETE.
GENERAL OPERATION
HUMPHREY FIELD ANALYZER II -
i
series