Zeiss HUMPHREY 720i User Manual page 260

11-52
REV. B 02/03 PN 51680-1
10
Here is an example of the
second meridian added
to the program. The 80 degree
meridian shows a gray box on the
field. The previous meridian (at 60
degrees) has changed to a circle.
This is to make it easier to identify
the most recent meridian
programmed.
11
When all the meridians
for the first isopter have
been added, press the NEW
ISOPTER button.
12
The Kinetic Parameter
Setup screen will appear.
Change the stimulus parameters
and the test speed to the desired
settings for the second isopter to
be tested. Press SELECTION
COMPLETE.
HUMPHREY FIELD ANALYZER II - i series
KINETIC TESTING