KINETIC TESTING
REV. B 02/03 PN 51680-1
7
To perform another
Custom Scan, repeat the
previous steps. Continue until
all desired points for each
particular isopter are
determined.
After all desired points have
been mapped, press END
CUSTOM SCAN to return to the
Kinetic Test screen.
8
If all of the desired
stimuli from the different
isopters have been tested, press
END TEST from the Kinetic Test
screen.
Here is an example of a Custom
Scan adding definition to the
inferior border of a
hemianopsia.
HUMPHREY FIELD ANALYZER II - i series
11-37