Adding Single Points - Zeiss HUMPHREY 720i User Manual

10-6

Adding single points

REV. B 02/03 PN 51680-1
6
The Custom screen
will appear.
The chosen Point Pattern, Field
Size, and Point Spacing are
indicated in the lower, right-hand
corner of the screen.
Note: Custom tests are automatically generated for the right eye only. When the left eye is
tested, the HFA II will flip the test pattern to accommodate for the mirrored physiological
differences. Do not attempt to design a left eye Custom test.
1
If you chose the Single Point (X, Y) option, you may now input the individual points to be
tested. Press the ADD ENTRY button.
2
For a Single Point entry,
you must enter the (X, Y)
coordinate values (as whole
numbers) of each point you wish
to test.
Input the "X" value of the point.
Press ENTER.
HUMPHREY FIELD ANALYZER II -
CUSTOM TESTING
i
series