Running Automated Kinetic Tests - Zeiss HUMPHREY 720i User Manual

KINETIC TESTING
RUNNING
AUTOMATED KINETIC
TESTS
Automatic mode
REV. B 02/03 PN 51680-1
The Automatic mode for running a Kinetic test allows you to start the test and have all isopters
tested to the completion of the test. The HFA II will automatically select the next meridian to
test, start the stimulus and record at which point the patient pressed the response button. It
will continue until all programmed isopters and meridians have been tested.
Note: No Special Mapping options will be available when performing a test in the
Automatic mode.
1
Starting at the Main Menu,
press SHOW TEST LIBRARY.
2
Choose KINETIC.
3
Select the Kinetic test to run.
HUMPHREY FIELD ANALYZER II - i series
11-15