Software Installation; Contents Software Kit; Steps To Upgrade Software - Zeiss Humphrey Field Analyzer 3 Instructions For Use Manual

(2) Software Installation

This section covers the installation instructions for the Humphrey

Contents Software Kit

The software kit contains two USB drives:
• The white USB drive with the "SW" label contains the software update and is used for loading
the software onto the HFA3.
• The blue USB drive with the "UD" label is the user documentation, including the installation
instructions and the Instructions for Use. This content is for your reference and is not required
for software installation.

Steps to Upgrade Software

For all existing versions of HFA3 software, start with the following steps to upgrade the software:
1. Start the instrument and log in as a user with Administrator privileges.
2. Select the Settings icon
screen will appear.
3. Record the software version number you are currently running.
HFA3 Installation Instructions
Software Installation
®
Field Analyzer 3 (HFA
located in the Toolbar at the top of the screen. The Settings
2660021166131 Rev. A 2018-11
2-1
™
3).