Zeiss HUMPHREY 720i User Manual page 267

KINETIC TESTING
REV. B 02/03 PN 51680-1
7
To enter the first meridian,
press ADD MERIDIAN.
8
The Keypad will appear on the screen. Type the meridian desired. Press ENTER.
The meridians to be entered are:
0,
45,
90,
135,
180,
225,
270,
315
9
A small gray square will be
placed on the meridian
entered. In this example, the
square can be seen on the 0
degree meridian. The meridian is
displayed at the right.
Continue to add the meridians to
be tested by repeating the above
steps.
If you make a mistake, see
"ERASING A MERIDIAN".
HUMPHREY FIELD ANALYZER II - i series
11-59