Setting Test Parameters; To Change Test Parameters; The Screening Test Parameter Setup Screen - Zeiss HUMPHREY 720i User Manual

4-2
SETTING TEST
PARAMETERS

To change test parameters

REV.B 02/03 PN 51680-1
Test parameters are the testing conditions used during a test, e.g. stimulus size, test strategy,
test speed, etc. While the majority of patients are best examined using "standard" parameters
(or default parameters), you can alter the parameter settings for purposes of tailoring the test
to meet particular patient needs.
An example of a test parameter is the fixation target which has four settings: central, small
diamond, large diamond, and bottom LED. The central fixation light is the default target. It is
suitable for most patients, but you can change it if the patient requires a larger target.
Figure 4.1: The Screening Test Parameter Setup Screen
You can access the parameter setup screens two ways:
• From the Start Test screen via CHANGE PARAMETERS.
• From the Test in Progress and Pause screens; during testing only test speed and fixation
monitoring can be changed.
1
Start at the Parameter
Setup screen (Screening
or Threshold). Select the
parameter you wish to change.
TEST PARAMETERS AND STRATEGIES
HUMPHREY FIELD ANALYZER II - i series