Zeiss HUMPHREY 720i User Manual page 233

KINETIC TESTING
REV. B 02/03 PN 51680-1
3
In the Step by Step mode,
you will be see this
screen upon the completion
of the 8 meridians. Press END
TEST for storing test data.
Prior to ending the test, SPECIAL MAPPING can be activated to allow looking for isolated
scotomas. This extra testing will not change the calculated Efficiency Score. The next part of
this section goes into greater detail about Special Mapping.
4
This screen will appear
after pressing END TEST
in the Step by Step mode.
This is also the screen that
will be presented at the end
of an Automatic test. All of
these options will be covered
later in this section.
HUMPHREY FIELD ANALYZER II - i series
11-25