Statpac Test Parameters; Statpac Parameters For White-On-White Perimetry; Statpac Parameters For Blue-Yellow Perimetry - Zeiss HUMPHREY 720i User Manual

STATPAC ANALYSIS & PRINTING RESULTS
STATPAC test
parameters
REV. B 02/03 PN 51680-1
STATPAC will analyze tests that fall within the parameters listed below:
Table 7.1: STATPAC Parameters for White-on-White Perimetry
Type of test:
Test pattern:
Test strategy:
Stimulus color:
Stimulus size:
Fixation target:
Foveal threshold:
Fluctuation test:
Test Speed:
STATPAC analysis may be used with all Central 24-2 and 30-2 threshold test results. There are
some limitations. The Glaucoma Change Probability Analysis and Glaucoma Hemifield Test
(GHT) are not available with tests using the FastPac strategy. Glaucoma Change Probability
Analysis is also not available for the SITA tests. For Central 10-2 test results, STATPAC produces
a Single Field Analysis or an Overview showing up to sixteen (16) tests results; the Change
Analysis and Glaucoma Change Probability Analysis are not available.
The parameters needed for STATPAC analysis of Blue-Yellow test results are listed below. Single
Field Analysis and Overview printouts are available. The GHT is not available with FastPac tests.
Table 7.2: STATPAC Parameters for Blue-Yellow Perimetry
Type of test:
Test pattern:
Test strategy:
Stimulus color:
Stimulus size:
Fixation target:
Foveal threshold:
Fluctuation test:
Test Speed:
Threshold
Central 10-2, 24-2, 30-2
SITA Standard, SITA Fast, Full Threshold, FastPac
White
Size III
Any
On or Off
On or Off (SITA tests automatically set to Off)
Normal or Slow
Threshold
Central 24-2, 30-2
Full Threshold, FastPac
Blue
Size V
Any
On or Off
On or Off
Normal or Slow
HUMPHREY FIELD ANALYZER II -
7-3
i
series