Reading A Location With The Barcode Pen; Reading A Location From The Measurement Menu; Reading Several Locations With Barcode Pen From The Measurement Menu - TESTO 300 XXL Instruction Manual

Reading a location with the barcode pen (during the zeroing phase)
Initialisation
10 sec
You can also enter the location after the expiry of the zeroing
phase.

Reading a location from the measurement menu

Measurement menu
Reading several locations with the barcode pen from
measurement menu.
Procedure as described above (simply repeat the
procedure). The location last read is active.
Main menu Memory
Device zeroing
Measurement menu
Measurement menu
47