Table of Contents
Advertisement
Main menu Input
for analyser box
Zeroing phase
3 sec
2 x
Select "Input"
Select "Parameter"
Select "Pitot factor"
Enter the pitot tube
factor
80
P
ITOT TUBE FACTOR
Note
The pitot tube factor of the standard Testo pitot tubes
equals 1.00 and need not be changed. Enter the factor 0.67
for the straight testo pitot tubes. For other pitot tubes, ask
the supplier for the pitot tube factor and store.
Enter the pitot tube factor as a parameter:
1 Connect the probe. Connect analyser box to control unit;
switch on control unit.
2 Change to the main menu with key
3 From Main menu – Input – Parameter – select "Pitot
factor" menu.
4 Accept the current reading with key
"Set pitot tube factor" with the cursor keys.
5 With function key
to the menu "Circle - Cross section" or with key
back to the measurement menu.
E E n n d d
Menu "Set cross-
section"
E E n n d d
, an automatic branch is made
E E n n d d
.
or select
,
Advertisement
Table of Contents
