Table of Contents
Advertisement
Cover caps for all humidity probes Ø 12 and 21 mm
Metal guard basket, material stainless steel V4A. Rapid compensation time, rugged and
heat resistant. Application: for flow velocities <10 m/s.
Wire mesh filter, material stainless steel V4A. Rapid compensation time, protects against
dirt and destruction. Application: meteorology, water spray, condensation.
Installation filter for metal guard basket and plastic cap.
Cap with wire mesh filter
PTFE sintered filter, material PTFE. Favourable behaviour in condensation, water
repellent, high resistance to aggressive media.
Applications: compressed air measurements, wet areas (long-term measurements), high
flow velocities.
Stainless steel sintered cap, material stainless steel V2A. Very rugged, suitable for
penetration, can be cleaned with compressed air, mechanical probe protection.
Applications: High mechanical loads, high flow velocities.
Surface adapter for humidity probes Ø 12 mm
Accessories for humidity/temperature probes,
triple probe + rpm probe
Adapter for humidity probe 0636.XX60 and Pt100 probe 0605.XX73/XX72
Connecting cable for probes with plug-on head, length 1.5 m, jack material PUR
Connecting cable for probes with plug-on head, length 5 m, jack material PUR
Extension lead between plug-on head cable and device, length 5 m, jack material PUR
Telescope for probes with plug-on head, max. extension length 1 m, cable length 2.5 m, jack material PUR
Inspection and calibration set for humidity probes and triple probe
Adapter for humidity calibration, triple probe 0635.1545, order with calibration set.
Inspection and storage humidity (33 %RH) for humidity probes and triple probe
Ordering data
Connecting
Order no.
cable
0554.0665
Ø 21 mm
0554.0755
Ø 12 mm
0554.0667
Ø 21 mm
0554.0757
Ø 12 mm
0554.0666
Ø 21 mm
0554.0756
Ø 12 mm
0554.0640
Ø 21 mm
Ø 12 mm
0554.0647
0628.0012
Order no.
0554.0454
0430.0143
0430.0145
0409.0063
0430.0144
0554.0660
0554.0661
0554.0636
113
Advertisement
Table of Contents
