Device Data; Bus Address - TESTO 300 XXL Instruction Manual

Zeroing phase
3 sec
2 x
Main menu
Select "Service"
Select

"Device data"

Zeroing phase
3 sec
2 x
Main menu
Select "Service"
Select "Bus address"
Enter bus address
Select number
Confirm selection
Device data
1 Connect analyser box to control unit; switch on control
unit.
2 Change to the main menu with key
3 From Main menu - Service – Device data menu
4 Return to the measurement menu with key
Display device data

Bus address

The control unit and analyser box are factory adjusted to
different bus address numbers.
If these are equivalent, the bus address number of the
control unit or the analyser box must be changed to prevent
connection problems.
1 Connect analyser box to control unit; switch on control
unit.
2 Change to the main menu with key
3 From Main menu - Service – Bus Address – Change Bus
Address
4 With the cursor keys
number on the numeric block and confirm with key
Possible numeric combinations: 01 - 99.
5 Accept entered value with
branch to the main menu.
E E n n d d
Main menu Service
Measurement menu
E E n n d d
Measurement menu
for analyser box
.
.
.
, select a
.
. Automatic
89