Dew Point At - TESTO 300 XXL Instruction Manual

Main menu Input
for analyser box
Zeroing phase
3 sec
2 x
Select Input
Select "Dew point/ambient air"
Activate
"Temperature/ambient air"
Enter AT
temperature
84
Dew point/ambient air (AT)
1 Connect humidity probe to control unit. Connect analyser
box to control unit; switch on control unit.
2 Change to the main menu with key
3 From Main menu – Input – Dew point/ambient air – select
the "Temperature/ambient air" menu.
4 With the cursor keys
temperature reading or accept the current reading with
function key
5 Function key
to menu "Humidity/ambient air".
6 Enter the numbers as described in item 4.
7 Function key
to menu "Dew point/ambient air".
8 Automatic display of the dew point in the input box.
With function key
9 Return to the measurement menu with key
Select number
Confirm selection
E E n n d d
Enter AT humidity
E E n n d d
.
branches automatically
E E n n d d
branches automatically
E E n n d d
, the value is accepted.
E E n n d d
.
, enter the
.
Display AT dew point
E E n n d d
Measurement menu