Table of Contents
Advertisement
Initialisation
10 sec
Measurement menu
Main menu
Select "Probe"
Select "Scaling"
Select "Probe"
socket 1
Measurement with control unit + cable 0554.0007
Currents and voltages are measured with the probe
0554.0007.
These signals can be assigned to a different physical unit.
Example: 0...20 mA are to represent 0...100 %RH when
displayed later.
1 Connect current and voltage cable, switch on control
unit.
2 Enter the physical unit:
- Press
key.
- From Main menu - Probe - Scaling- Probe socket 1 -
Menu min. input, max. input... Set values
- Min. input
- Max. input -
- Min. output -
- Max. output -
- Enter unit
- %RH -
- Enter decimal places -
3 Scaling info
4 Return to the measurement menu with
5 Display of the current reading.
Select "min input"
Example measurement
Current/voltage measurement
with the control unit
-
- enter
0 -
- enter 20 -
- enter
0 -
- enter 100 -
E E n n d d
Set value
E E n n d d
Set further values
(see above)
E E n n d d
E E n n d d
E E n n d d
E E n n d d
.
O O K K
.
Display info
Measurement menu
37
Advertisement
Table of Contents
