Solid Fuel Measurement Option For Analyser Box - TESTO 300 XXL Instruction Manual

Solid fuel measurement option
for analyser box
Measurement menu
Main menu
Selecting solid fuel
measurement
Solid fuel measurement
is activated
Specify length of time
E E n n d d
72
The use of a probe preliminary filter is obligatory for
measuring solid fuels:
For 335mm probe: 0440 7435
For 700mm probe: 0440 7436
1 Connect analyser box and control unit; switch on control
unit.
2 Go to main menu via
3 Click on Main menu - Memory - Solid fuel measurement
and confirm with
4 Specify "Length of time" using the arrow buttons. Confirm
value via
E E n n d d
"CO range" menu.
5 Set required measuring range and confirm via
button.
6 Information on values entered.
7 Start measurement by clicking on
Mean calculation stops once the specified length of time has
elapsed.
Note:
If you wish to use the default values (duration: 15min.,
measuring range: CO High), you can also select "Info"
directly in the "Solid fuel measurement" menu and start the
measurement.
Set CO range
Info
.
.
and proceed to
S S t t a a r r t t
Start measurement
S S t t a a r r t t
Fresh air
2 min.
.
Measurement
Measurement stops
automatically
Measurement menu