Table of Contents
Advertisement
Maintenance
Filter, flue gas
Filter, fresh
air inlet
Filter, diluting air
Cross strut
Filter housing
Condensation
tank
Drain plug
Remove
condensation
tank
92
Filter change
1. If the filter is visibly contaminated, it must be replaced
under all circumstances.
2. Replace the filter if the pump performance drops
(audibly).
In most cases, it is sufficient to replace the flue gas filter.
- To replace a filter, remove the filter cover by twisting to the
left.
- Take out the used filter and insert the new filter.
- Screw on the filter cover.
- The cross strut of the filter housing must be aligned with
the markings on the box housing.
Spare filters with Part no. 0554.3381 available.
Condensation trap
To be observed
- Only empty the condensation trap when the pump is
switched off.
- Do not damage the sealing rings when assembling the
condensation trap.
- Pull out the condensation trap horizontally to empty the
condensation.
- Open the drain plug.
Advertisement
Table of Contents
