Table of Contents
Advertisement
Main menu Input
for control unit
Measurement menu
Select "Input"
Activate "Parameter"
Select "Pitot factor"
Set the pitot tube
factor
E E n n d d
Menu: "Cross
section"
60
P
ITOT TUBE FACTOR
Note
The pitot tube factor of the standard Testo pitot tubes is
1.00 and need not be changed. Enter the factor 0.67 for the
straight testo pitot tubes. For other pitot tubes, ask the
supplier for the pitot tube factor and store.
Enter the pitot tube factor as a parameter:
1 Connect probe, switch on control unit.
2 Change to the main menu with key
3 From Main menu – Input – Parameter – select "Pitot
factor" menu.
4 Accept the current reading or select "Set pitot tube
factor" with the cursor keys.
5 With function key
to the menu "Cross section - Circle" or with key
back to the measurement menu.
, an automatic branch is made
E E n n d d
.
,
Advertisement
Table of Contents
