Table of Contents
Advertisement
Main menu Input
for control unit
Measurement menu
Select "Input"
Select "Parameter"
Select "Temp."
56
Parameters
Note
The temperature, relative humidity and absolute pressure
influence the air density at the measuring point. When these
values have been entered, the density is calculated
automatically. The result is composed as follows:
Metres above sea level
Barometric pressure
Differential pressure
T
EMPERATURE
Enter the temperature as a parameter:
1 Connect probe, switch on control unit.
2 Change to the main menu with key
3 From Main menu – Input – Parameter – select the
"Temp." menu.
4 Accept the current reading with key
"Input temperature" with the cursor keys.
5 With function key
to the menu "Input humidity" or with key
measurement menu.
or
Enter temperature
E E n n d d
Menu: Set humidity value
Temperature
Humidity
Absolute pressure
, an automatic branch is made
E E n n d d
Current reading
comes into effect
Density
.
or select
back to the
Advertisement
Table of Contents
