Main menu Service
for control unit
Measurement menu
Main menu
Select "Service"
Select "Op. values"
Display operating
values
Control Unit
Measurement menu
Display device data
Control Unit
70
Operating values
1 Switch on control unit.
2 Change to the main menu with key
3 From Main menu - Service – select "Op. values".
4 Return to the measurement menu with key
Resetting factory settings
Reset to initial settings.
Address
Input via PC software only.
Device data
1 Switch on control unit.
2 Change to the main menu with key
3 From Main menu – Service – select "Device data".
4 Return to the measurement menu with key
.
.
.
.