Offset Factor; Info - TESTO 300 XXL Instruction Manual

Main menu Input
for control unit
Measurement menu
Select "Input"
Activate "Parameter"
Select "Offset
factor"
Set the offset factor
E E n n d d
Set value comes
into effect
Parameter info
Measurement menu
Select "Input"
Activate "Parameter"
Select "Info"
62
O
FFSET FACTOR
1 Connect probe, switch on control unit.
2 Change to the main menu with key
3 From Main menu – Input – Parameter – select "Offset
factor" menu.
4 Accept the current value with key
offset factor" with the cursor keys.
5 Go automatically to the menu "Offset factor" or press
to go back to measurement menu.
Offset factor calculation:
2p
v = k s
rho
k

= Offset factor

s = Pitot tube factor
p = Pressure (Pa)
rho = Density (kg/m
I
NFO
Overview of all parameters
1 Change to the main menu with key
2 From Main menu – Input – Parameter – select the "Info"
menu.
3 Return to the measurement menu with key
Parameter info
)
3
Measurement menu
.
or select "Set
E E n n d d
.
.