Switching Off; Address/Location - TESTO 330 Instruction Manual

5 First steps

5.2.10. Switching off

- Possibly: The pump starts and the sensors are rinsed until the
switch-off thresholds (O2 > 20 %, other measurement
parameters < 50 ppm) are reached. The maximal rinsing period
is 3 minutes.
- The measuring instrument switches off.
5.3.

Address/Location

All measuring values can be saved under the currently active
location. Measuring values that have not been saved are lost when
the measuring instrument is switched off!
Addresses and locations can be created, edited, copied and
enabled. Addresses and locations (incl. protocols) can be deleted.
Call up function:
[
>
There are various options for opening address.
1. Edit search setting: [Edit].
2. Select search setting: [▲],
Possible settings:
•
•
•
3. Carry out search according to search setting:
40
Unsaved meas. views will be lost when the flue gas
analyzer is switched off.
] Address/Location
→
Show all: All address/location are displayed.
Search: A search text only brings up address/location that
contain characteristics of the search text.
Filter: Individual letters or numbers can be selected. All data
beginning with the relevant letter/number is displayed.
The initial letter is the determining factor for the
function, and this can only be selected individually. The
search
function can also be used to find a series of
several letters within the address!
→ [OK].
[▼] → [OK].
filter
[Search]