Lubricating Lid Rollers - Henny Penny PFG-691 Technical Manual

2-33. NYLATRON STRIPS
REPLACEMENT (CONTD)
2-34. LUBRICATING LID
ROLLERS
Aug. 2010
9. Lift the front shroud up and out, over the arm of the lid.
10. Thread the new nylatron strip through the track in the front
shroud.
11. Lining up the holes in the strips, fit the front shroud back
over the lid arms.
12. Secure the strips to the weight assembly.
13. Replace back shroud, top cap, and lid, and replacement is
complete.
The lid rollers, in the back of the fryer, should be lubricated at
least once a year, to allow the lid easy movement.
1. Remove the back shroud of the fryer.
2. Using spindle lube, part number 12124, place a small
amount of lube on both top and bottom rollers. Make sure
to lube both left and right rollers.
3. Thoroughly clean the inside of the back shroud and the
back of the fryer.
4. Replace the back shroud.
2-33
Model 691