Henny Penny PFG-691 Technical Manual page 110

Model 691
Menu Step Description
Enter the new code sequence a second time in the same manner as the first. Again, press
the [P] (PROG) button when the entry is complete.
If the same key sequence is entered both times, the controller responds " * CODE
CHANGED * ". From this point on, the new code sequence is required for access to
Tech Mode functions. The previous code is erased and is no longer valid.
If the first and second entries do not match exactly, the controller indicates "DID NOT
MATCH", "NOT CHANGED". In this case, the access code will not be changed -- the
previous value remains in effect.
The code entry process may be abandoned at any point by pressing the "I" (INFO) button.
The display immediately shows "X CANCELLED X" and returns to the initial "Change
Code?" display. The previous code remains in effect.
If no keys are pressed for 30 seconds, the entry process is automatically abandoned. The
display shows "X CANCELLED X" and the previous code value remains in effect.
T-16 DO TOTAL INIT
This step allows all programmable settings, all product settings, and all statistics values
to be initialized to factory preset values.
(The Activity Log, however, is not reset by this initialization, and in fact will log a record
of the "init" function itself.)
To totally initialize the controller -- including all cook settings -- back to factory default
values, press and hold the DOWN button for about 2 seconds.
Calibration data will not be affected by this initialization, unless values are found to be
outside of acceptable limits.
NOTE: Statistics values, the Error Log, Review Usage data, etc., will be reset by this
"total" initialization. All of the operating history data will be lost. For this reason, the
normal "Init" step in Special Program mode is generally recommended, unless one
specifically intends to completely reset all the statistics data.
Dec. 2016
4-6