Removal Of Safety Valve - Henny Penny PFG-691 Technical Manual

2-17. DEADWEIGHT VALVE (Continued)
ORIFICE CAP
2-18. REMOVAL OF SAFETY
VALVE
SAFETY RELIEF VALVE
Sept. 2004
DO NOT PULL THE RING ON THE SAFETY
RELIEF VALVE. HOT STEAM WILL BE
RELEASED AND SEVERE BURNS WILL RESULT.
WEIGHT
1. At the end of each day's usage of the fryer, the deadweight
valve must be cleaned. Fryer must be off and the pressure
released. Open the lid and then remove the deadweight
valve cap and deadweight.
Failure to clean the deadweight assembly daily could
result in the fryer building too much pressure. Severe
injuries and burns could result.
2. Wipe both the cap and weight with a soft cloth. Be sure to
to thoroughly clean inside cap, the weight seat, and around
valve deadweight orifice.
3. Dry the parts and replace immediately to prevent damage
or loss.
DO NOT ATTEMPT TO REMOVE SAFETY RELIEF
VALVE WHILE FRYER IS OPERATING, OR
SEVERE BURNS OR OTHER INJURIES WILL
RESULT.
1. Remove pressure gauge.
2-18
Model 691