Lid Operation - Henny Penny PFE-592 Operator's Manual

3-1.
OPERATING COMPONENTS
(CONT.)
Filter Union
Fuses
3-2.

LID OPERATION

Oct. 2016
Connects the filter to the filter pump, and allows easy removal of the
filter and drain pan
A protective device which breaks the circuit when the current exceeds
the rated value
To close lid:
1.
Lower the lid until gasket comes into contact with the frypot and
lock the lid in place with the lid latch.
2.
Pull lid handle forward until it stops.
3.
Lift up on the lid handle until it stops.
4.
Bring lid handle out towards you until it stops.
5.
Push lid handle down, locking lid in place.
LID MUST BE LATCHED PROPERLY OR
PRESSURIZED SHORTENING AND STEAM MAY
ESCAPE FRYPOT. SEVERE BURNS WILL RESULT.
DO NOT LIFT HANDLE OR FORCE LID LATCH
OPEN BEFORE PRESSURE GAUGE READS "0"
PSI. ESCAPING STEAM AND SHORTENING WILL
RESULT IN SEVERE BURNS.
TO AVOID SERIOUS PERSONAL INJURY, DO NOT
OPERATE WITHOUT LID COVER IN PLACE AND
ALL COMPONENTS INSTALLED.
TO AVOID SERIOUS PERSONAL INJURY, DO
NOT TAMPER WITH ANY COMPONENT OF LID
LOCKING MECHANISM.
To open lid:
1.
Gently raise handle until it stops.
2.
Push handle back until it stops.
3.
Lower handle.
18