Table of Contents
Advertisement
2-23. LUBRICATING LID
ROLLERS
2-24. RELAYS
705
The lid rollers, in the back of the cooker, should be lubricated at
least once a year, to allow the lid easy movement.
1. Remove the back shroud of the cooker.
2. Using spindle lube, part number 12124, place a small amount of
lube on both top and bottom rollers. Make sure to lube both
left and right rollers.
The relays receive messages from the control board and operate the
components in the fryer. See wiring diagrams to help locate the
desired relay.
1. Remove electrical power supplied to the unit.
To avoid electrical shock or property damage, move the
POWER switch to OFF and disconnect main circuit
breaker, or unplug cord at wall receptacle.
2. Remove the control panel as discussed in the Complete
Control Panel Section.
3. Label and then pull the wires off of the relay.
4. Using a 5/16" socket, remove the 2 nuts securing the relay and
pull the relay from the unit.
5. Install new relay in reverse order.
Model OFG- 390
2-22
Advertisement
Table of Contents
Troubleshooting
