Henny Penny PFG-691 Technical Manual page 158

Inspection 23
Rev. A
1. Tighten all 16 (four in each) spreader bar screws with a Philips screwdriver. Do not over tighten.
2. Tighten all three high limit bracket screws. Make sure the high limit bulb is seated in the
bracket. Do not over tighten.
1219 US 35 West P.O. Box 60 Eaton, OH 45320 (937)456-8400 Fax (937)456-8402 www.hennypenny.com