Blower Assembly - Henny Penny PFG-691 Technical Manual

2-21. BLOWER ASSEMBLY

Sept. 2004
The blower motor circulates air into the burner area to create
the correct heat for the fryer. If the blower fails, a sensor will
shut the power control valve down.
1. Remove the electrical power supplied to the unit.
To avoid electrical shock or property damage, move the
power switch to OFF and disconnect main circuit
breaker, or unplug cord at wall receptacle.
2. Remove back shroud and right side panel.
3. Remove the tube from the blower.
On newer fryers, the blower tube slides out of the bracket,
instead of being bolted. See photo below.
4. Remove the bracket from the frame.
2-22
Model 691