Drain Pan Assembly - Henny Penny CFE-415 Operator's Manual

3-13
DRAIN PAN
ASSEMBLY
March 2015
1. Slide a filter envelope onto the filter screen so the plug is
protruding through the hole.
During assembly, be sure to apply oil to all O-rings to lubricate to help
prevent tears and loss.
2. Fold the corners of the open end of the filter envelope inward.
Then fold the end down the seal off the opening.
3. Slide the two handle clamps onto the ends of the filter screen
assembly with the handles facing the same direction of the plug.
4. Place the filter screen into the bottom of the drain pan with the
plug side up.
5. Lining up the hole of the pickup tube with the plug of the filter
screen, press the tube down.
6. Position the pick up tube so that the guides slide into the notches
located on the holder in the front of the drain pan. Press down on
the pick up tube to confirm it is fully engaged on the filter screen
plug and in the holder.
7. Place the crumb catcher into the drain pan so the legs straddle the
filter screen.
8. Place lid onto drain pan. Slide the bent side of the drain pan lid
into the lip end of the drain pan base first.
9. Push the drain pan into place and lock it into place using the
locking latch.
10. To remove the drain pan for cleaning, reverse this procedure.
32
Model CFE-415, 427