Introduction; Overview; Ce Conformity (Europe); Figure 1-1 Operator Interface Displays And Indicators - Honeywell DC33XB User Manual

1.1 Overview

The UDC3300 is a microprocessor-based, stand-alone controller. It combines the
highest degree of functionality and operating simplicity offered in a 1/4 DIN size
controller.
With a typical accuracy of ± 0.20 % of span, the UDC3300 is an ideal controller for
regulating temperature and other process variables in numerous heating and cooling
applications, in metal working, food, and pharmaceuticals, and testing and
environmental work.

1.2 CE Conformity (Europe)

This product is in conformity with the protection requirements of the following
European Council Directives: 73/23/EEC, the Low Voltage Directive, and
89/336/EEC, the EMC Directive. Conformity of this product with any other "CE Mark"
Directive(s) shall not be assumed.
T - Accutune in progress
t - PV tune in progress
C - Computer setpoint active
R - Run SP ramp/program
H - Hold SP ramp/program
Indicator definition when lit
ALM - Alarm conditions exist
DI - Digital input active
3 - LSP 3 active
RSP - Remote SP or SP2 active
OUT - Control relay 1 or 2 on
Keys - See Table 1-1

Figure 1-1 Operator Interface Displays and Indicators

12/00

1. Introduction

Upper Display - six characters
• Normal Operation - four digits dedicated to display the process variable
• Configuration Mode - displays parameter value or selection
Lower Display - eight characters
• Normal Operation - displays operating parameters and values
• Configuration Mode - displays function groups and parameters
Indicator definition when lit
F - °Fahrenheit being used
C - °Centigrade being used
1 2 F C
ALM
DI 1 2 3
R
RSP
1 2 SP 3300
OUT
FUNCTION LOWER
LOOP 1/2 DISPLAY
SET UP
UDC3300 Basic Model: DC33XB User Manual
MAN - controller in manual mode
A - controller in automatic mode
MAN
3300
%
SETPOINT
MANUAL
SELECT
AUTO
RUN
HOLD
Introduction
MAN and A off —
communications
option active
Deviation Bargraph
• Center bar indicates PV is
within ±1% of setpoint.
• Next bar will light if PV is
between ±1% but less than
±2% in deviation.
• If PV is equal to or greater than
±10% deviation, the center bar
plus all ten deviation bars will
light.
1