Labels/Markings - Honeywell HON R100NG Series User And Maintenance Manual

2.3 Labels/Markings
Illegible labels
Labels on the
HON R100NG actuator
assembly
User manual for HON R100 gas pressure regulator with HON P095NG pilot
Illegible information on the device poses a risk of injury due to resulting erroneous opera‐
tion, use, or installation.
Labels, as well as inscriptions and stamping on the device, can eventually become soiled or
otherwise unrecognizable to such an extent that users will not be warned effectively of
hazards and may be unable to follow required operating instructions. This will pose a risk of
injury.
 Make sure to always keep all relevant labels in good condition so that they will be easily
legible.
 Immediately replace damaged and missing labels.
The following labels/markings can be found on the front of the actuator assembly:
Figure
The following labels/markings can be found at the top of the actuator assembly:
Figure
No. Meaning
1 Name of the device
2 Nominal size and pressure rating
3 Body section materials
4 Arrow indicating the direction of flow
No. Meaning
1 ANSI pressure rating
2 Material
Description
9